这是我的问题。我需要安装和配置 2 台 Brocade ICX6610 作为核心交换机。我已经在 Fortigate 上设置了新的 vlan，并在 6610 中设置了一些 vlan dhcp 池。我的问题是当我想为 vlan 配置 IP 地址时，在 vlan 配置下没有“路由器接口”命令。

LPK-ICX6610-01(config)#sh running-config

Current configuration:

!

ver 08.0.10gT7f1

!
stack unit 1

  module 1 icx6610-24-port-management-module

  module 2 icx6610-qsfp-10-port-160g-module

  module 3 icx6610-8-port-10g-dual-mode-module

  stack-trunk 1/2/1 to 1/2/2

  stack-trunk 1/2/6 to 1/2/7

  stack-port 1/2/1 1/2/6

stack enable

!
!
!
!
vlan 1 name DEFAULT-VLAN by port
!
vlan 10 name LANUSER_GF by port
 tagged ethe 1/1/3
!
vlan 20 name LANUSER_1F by port
!
vlan 100 name WLAN by port
 tagged ethe 1/1/23 to 1/1/24
 untagged ethe 1/1/12
!
!
!
!

hostname LPK-ICX6610-01

no ip dhcp-client enable

ip dhcp-server enable

!

ip dhcp-server pool vlan_100

 dhcp-default-router 192.168.100.254

 dns-server 1.9.1.9 8.8.8.8

 excluded-address 192.168.100.1 192.168.100.10

 lease 0 12 0

 network 192.168.100.0 255.255.255.0

 deploy

!
!
!
!
!
!
!
!
!
!
!

end

LPK-ICX6610-01(config)#sh version

  Copyright (c) 1996-2014 Brocade Communications Systems, Inc. All rights 
reserved.

    UNIT 1: compiled on Dec 17 2014 at 18:25:28 labeled as FCXS08010g
                (7280225 bytes) from Primary /FCXS08010g.bin
        SW: Version 08.0.10gT7f1
  Boot-Monitor Image size = 370695, Version:10.1.00T7f5 (grz10100)
  HW: Stackable ICX6610-24*

--------------------------------------------------

LPK-ICX6610-01(config)#

LPK-ICX6610-01(config)#vlan 100

LPK-ICX6610-01(config-vlan-100)#router-interface ve 100

Invalid input -> router-interface ve 100

Type ? for a list

LPK-ICX6610-01(config-vlan-100)#