ASR1002 - 引导闪存

网络工程 思科 路由器 思科-asr
2022-02-25 00:20:54

由于这些问题,翻新的 ASR1002 无法启动:它已经到了 ROMMON。我如何从清洁到获得一些随机图像,以便我可以拼命升级图像?谢谢。

rommon 14 > dir bootflash:
Warning: filesystem is not clean
File System: EXT2/EXT3

11         16384     drwx------     lost+found
32385      4096      drwxr-xr-x     core
420993     4096      drwxrwxrwx     .prst_sync
80961      4096      drwxr-xr-x     .rollback_timer
12         0         -rw-------     tracelogs.584
388609     36864     drwxrwxrwx     tracelogs
518145     4096      drwxrwxrwx     .installer
13         383648104 -rw-r--r--     asr1002x-universalk9.03.07.01.S.152-4.S1.SPA.bin
19         3136      -rw-r--r--     TEA_LISP_NOVRF
15         7371      -rw-r--r--     KGLNS
16         7371      -rw-r--r--     KGLNS_WORKIN
113345     4096      drwxr-xr-x     FT
48578      2412      -rw-r--r--     startup-config
48579      869710    -rw-r--r--     KP_PR2650_IMIX.cfg
14         383658280 -rw-r--r--     asr1002x-universalk9.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.SSA.bin
17         1529      -rw-r--r--     basic_confg
18         3363      -rw-r--r--     TEA_LISP_VRF
20         1793      -rw-r--r--     basic
22         17        -rw-r--r--     LISP-MapCache-IPv4-00000000-00100
21         53796     -rw-r--r--     reload.log
23         121       -r--r--r--     debug.conf
129537     4096      drwxr-xr-x     .ssh
rommon 15 > boot system bootflash:asr1002x-universalk9.03.07.01.S.152-4.S1.SPA.bin
boot: unsupported boot device "system"
rommon 16 > boot ?
boot: unsupported boot device "?"
rommon 17 > 


monitor: command "" not found


rommon 18 > boot bootflash:asr1002x-universalk9.03.07.01.S.152-4.S1.SPA.bin



Image validated
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 1 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 5 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 6 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 7 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 8 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 9 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 10 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 11 contained errors which were auto-corrected.
%IOSXEBOOT-4-DEVICE_MISSING: (rp/0): Integrity check for missing device /dev/harddisk not performed.
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): prep_storage took: 41 seconds, expected max time 10 seconds
%IOSXEBOOT-4-HARDDISK_MISSING: (rp/0): harddisk: not present, boot process continuing
%IOSXEBOOT-4-BOOT_PARAMETER: (rp/0): Booting with custom BOOT_PARAM setting
%IOSXEBOOT-4-DEBUG_CONF: (rp/0): Using DEBUG_CONF file /bootflash/debug.conf
%IOSXEBOOT-4-WATCHDOG_DISABLED: (rp/0): Hardware watchdog timer disabled: disabled by PVP_IGN_CRITICAL_PROC_DOWN
%IOSXEBOOT-4-SR_INIT_SHELL: (rp/0): Router waiting for interactive input for prechasfsinit
1个回答

您可以设置配置寄存器,然后重置以使用设备上的映像启动,忽略启动配置:

rommon 1 > confreg 0x2142

rommon 2 > reset

启动后,您可以加载已从 Cisco 购买许可证的任何映像。