如何测试专用带宽 - 10 Mbps

网络工程 带宽
2022-02-21 07:38:32

Level 3 最近在我的公司安装了一个专用的互联网连接 (10 Mbps 1:1)。

当我使用 speedtest.net 或任何其他测试网站时,速度值非常差(下载为 1.56,上传为 2.39)。

因此,我声称 Level 3 没有提供约定的带宽,但他们说他们执行了“饱和测试”,其中带宽达到 10 Mbps。他们还说他们的测试是准确的,因为它不依赖于像 speedtest.net 这样的测试服务器

我怎么知道他们说的是真话?

这是图像:

三级检测报告

这是他们的报告:

FastEthernet4 is up, line protocol is up
  Hardware is PQII_PRO_UEC, address is b838.61ac.b57c (bia b838.61ac.b57c)
  MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
     reliability 255/255, txload 25/255, rxload 25/255
  Encapsulation 802.1Q Virtual LAN, Vlan ID  1., loopback not set
  Keepalive set (10 sec)
  Full-duplex, 100Mb/s, 100BaseTX/FX
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:00, output 00:00:00, output hang never
  Last clearing of "show interface" counters 00:42:18
  Input queue: 4/75/0/0 (size/max/drops/flushes); Total output drops: 335
  Queueing strategy: Class-based queueing
  Output queue: 64/1000/0 (size/max total/drops)
  30 second input rate 10060000 bits/sec, 832 packets/sec
  30 second output rate 10038000 bits/sec, 829 packets/sec
     1085479 packets input, 1634002628 bytes
     Received 220 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog
     0 input packets with dribble condition detected
     1083785 packets output, 1632163458 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out
3个回答

您可以使用 IPERF ( http://en.wikipedia.org/wiki/Iperf ) 进行一些测试 wiki 页面上有公共服务器。

可以对 UDP 和 TCP 流量进行测试。这将使您了解连接速度。

您可以从网络外部对 speedtest.net 或类似网站进行另一次测试吗?只需在几个小时后将笔记本电脑直接连接到 WAN 上行链路或其他东西,看看你能得到什么,而无需涉及防火墙或其他任何东西。

一旦离开他们的网络,没有人可以保证带宽。这些类型的线路资格测试是针对 ISP 网络中的服务器进行的。

我并不是说你对 L3 没有问题。但是,随机速度测试站点并不总是能代表现实。