网络工程 - ASR9K 行默认宽度 0 不起作用。任何的想法？ - 吾爱随笔录

我试图在 ASR9K 路由器上将默认终端宽度设置为 0（或大于 80）。

但如下所示，一旦我注销并登录终端宽度更改为 80。

请告诉我我有什么问题。


RP/0/RSP0/CPU0:ASR9K(config)#line default width 0
RP/0/RSP0/CPU0:ASR9K(config)#commit
RP/0/RSP0/CPU0:ASR9K(config)#end
RP/0/RSP0/CPU0:ASR9K#sh terminal
Wed Jun 25 13:33:33.209 UTC
Line "vty0", Location "xxx.xxx.xxx.xxx", Type "VTY"
Length: 25 lines, Width: 0 columns
Baud rate (TX/RX) is 0, "Empty" Parity, 0 stopbits, 0 databits
Template: default
Capabilities: Timestamp Enabled
Allowed transports are telnet ssh.
RP/0/RSP0/CPU0:ASR9K#exit
Connection to ASR9K closed.
[root@server ~]# ssh ASR9K -l admin
admin@ASR9K's password:
RP/0/RSP0/CPU0:ASR9K#sh terminal
Wed Jun 25 13:34:37.904 UTC
Line "vty0", Location "xxx.xxx.xxx.xxx", Type "VTY"
Length: 25 lines, Width: 80 columns
Baud rate (TX/RX) is 0, "Empty" Parity, 0 stopbits, 0 databits
Template: default
Capabilities: Timestamp Enabled
Allowed transports are telnet ssh.