网络工程 - 我在两个路由器上都设置了静态路由，为什么我不能在环回接口之间ping？ - 吾爱随笔录

这是我的测试拓扑：

R6---R7

我在上面配置的接口IP地址，你可以在快照中查看。并且在两个路由器中，我都在 R6 10.0.0.22/32out interfaceR6 GE-0/0/0和 R7 10.0.0.11/32out interface中配置了静态路由R7 GE-0/0/0。

我认为这将在两个路由器的 lo0 中进行通信。但是结果却是，无法互相联系。为什么？

EDIT-01

在 R6 中：

interface LoopBack0
 ip address 10.0.0.11 255.255.255.0
#
ip route-static 10.0.0.22 255.255.255.255 GigabitEthernet0/0/0

interface GigabitEthernet0/0/0
 ip address 100.0.0.1 255.255.255.0

[R6]dis ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 7        Routes : 7        

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       10.0.0.0/24  Direct  0    0           D   10.0.0.11       LoopBack0
      10.0.0.11/32  Direct  0    0           D   127.0.0.1       LoopBack0
      10.0.0.22/32  Static  60   0           D   100.0.0.1       GigabitEthernet
0/0/0
      100.0.0.0/24  Direct  0    0           D   100.0.0.1       GigabitEthernet
0/0/0
      100.0.0.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

在 R7 中：

interface LoopBack0
 ip address 10.0.0.22 255.255.255.0
#
ip route-static 10.0.0.11 255.255.255.255 GigabitEthernet0/0/0

interface GigabitEthernet0/0/0
 ip address 100.0.0.2 255.255.255.0

<R7>dis ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 7        Routes : 7        

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       10.0.0.0/24  Direct  0    0           D   10.0.0.22       LoopBack0
      10.0.0.11/32  Static  60   0           D   100.0.0.2       GigabitEthernet
0/0/0
      10.0.0.22/32  Direct  0    0           D   127.0.0.1       LoopBack0
      100.0.0.0/24  Direct  0    0           D   100.0.0.2       GigabitEthernet
0/0/0
      100.0.0.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0