我有一个用ESPurna闪烁的Sonoff RF 桥接器，它工作正常，但在我按下 ESPurna 网络界面中的开关按钮的那一刻和实际执行操作之间有大约 1 秒的延迟。
另一边是“智能插头”。当用相关遥控器打开/关闭它时，反应是立即的（我试图在桥旁边发送信号以确保障碍物不会不公平地干扰）。
可能是 RF 桥发送消息的速度很慢（这很不幸，但也不是世界末日），还是我可以测试一些调整以加快速度？
设备信息
[094378] [MAIN] ESPURNA 1.13.3a
[094379] [MAIN] xose.perez@gmail.com
[094380] [MAIN] http://tinkerman.cat
[094381] [MAIN] CPU chip ID: 0x8250D4
[094382] [MAIN] CPU frequency: 80 MHz
[094384] [MAIN] SDK version: 1.5.3(aec24ac9)
[094385] [MAIN] Core version: 2.3.0
[094386] [MAIN] Core revision: 159542381
[094387]
[094389] [MAIN] Flash chip ID: 0x144051
[094392] [MAIN] Flash speed: 40000000 Hz
[094394] [MAIN] Flash mode: DOUT
[094395]
[094396] [MAIN] Flash size (CHIP) : 1048576 bytes / 256 sectors ( 0 to 255)
[094399] [MAIN] Flash size (SDK) : 1048576 bytes / 256 sectors ( 0 to 255)
[094400] [MAIN] Reserved : 4096 bytes / 1 sectors ( 0 to 0)
[094402] [MAIN] Firmware size : 450704 bytes / 111 sectors ( 1 to 111)
[094403] [MAIN] Max OTA size : 569344 bytes / 139 sectors ( 112 to 250)
[094404] [MAIN] EEPROM size : 4096 bytes / 1 sectors ( 251 to 251)
[094406] [MAIN] Reserved : 16384 bytes / 4 sectors ( 252 to 255)
[094407]
[094408] [MAIN] EEPROM sectors: 251, 250
[094410] [MAIN] EEPROM current: 250
[094411]
[094412] [MAIN] EEPROM: 4096 bytes total - 2064 bytes used (50%) - 2032 bytes free (49%)
[094414] [MAIN] Heap : 38808 bytes total - 25048 bytes used (64%) - 13760 bytes free (35%)
[094416] [MAIN] Stack : 4096 bytes total - 1488 bytes used (36%) - 2608 bytes free (63%)
[094418]
[094419] [MAIN] Boot version: 6
[094420] [MAIN] Boot mode: 1
[094424] [MAIN] Last reset reason: Power on
[094427] [MAIN] Last reset info: flag: 0
[094429]
[094430] [MAIN] Board: ITEAD_SONOFF_RFBRIDGE
[094432] [MAIN] Support: API BROKER BUTTON DEBUG_TELNET DEBUG_WEB LED MDNS_SERVER MQTT NTP SCHEDULER TELNET TERMINAL WEB
[094433] [MAIN] WebUI image: RFBRIDGE
[094435]
[094436] [MAIN] Firmware MD5: 364173c2f02e62693792f6614b6d00b3
[094438] [MAIN] Power: 3196 mV
[094439] [MAIN] Power saving delay value: 10 ms
[094441]