为什么我的 Cisco 4507 核心交换机无法识别我的 SFP+?

网络工程 思科 纤维 sfp
2021-07-09 02:51:03

我有一条可疑的 SFP+ 电缆(我认为它是仿制品),我试图用它来连接 Cisco 2960S 堆栈和 4507 核心机箱。我在下面包含了我认为相关的信息,但请随时提出更多要求,我会提供。双方都没有抱怨它是一个不兼容的 SFP 模块或任何类似的东西。如果我将电缆连接在两个 2960S 之间,它就可以正常工作。SFP 电缆似乎不再在亚马逊上列出,但这里有一个类似的版本,让您了解我正在使用的产品:Diablo 15m 直连 SFP+

我的 4507 显示“inactive”状态,而 2960S 显示“notconnect”让我相信问题可能出在 4507 上。我尝试了这个service unsupported-transceiver技巧,但它没有影响“inactive”状态。

这是4507端:

nyhq-core01#sh int status | inc SR
Te3/3                        inactive     1            full   auto 10GBase-SR


interface TenGigabitEthernet3/3
 switchport mode trunk
end

TenGigabitEthernet3/3 is down, line protocol is down (inactive)
  Hardware is Ten Gigabit Ethernet Port, address is e02f.6da5.8dc2 (bia e02f.6d)
  MTU 1500 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, Auto-speed, link type is auto, media type is 10GBase-SR
  input flow-control is off, output flow-control is off
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     0 packets input, 0 bytes, 0 no buffer
  MTU 1500 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, Auto-speed, link type is auto, media type is 10GBase-SR
  input flow-control is off, output flow-control is off
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts (0 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 input packets with dribble condition detected
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 3 interface resets
     0 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out

NAME: "TenGigabitEthernet3/3", DESCR: "SFP-10Gbase-SR"
PID: SFP-10G-SR        , VID: V03  , SN: C1402250129
NAME: "Supervisor(slot 4)", DESCR: "Sup 7-E 10GE (SFP+), 1000BaseX (SFP) with 4 SFP+ Ports"
PID: WS-X45-SUP7-E     , VID: V04  , SN: CAT164ZZZZ

这是 2960S 堆栈:

NYC-SW-26-01#sh int status | inc SR
Te2/0/1                      notconnect   1            full    10G SFP-10GBase-SR


interface TenGigabitEthernet2/0/1
 switchport mode trunk
end
TenGigabitEthernet2/0/1 is down, line protocol is down (notconnect) 
  Hardware is Ten Gigabit Ethernet, address is 44ad.d975.51b3 (bia 44ad.d975.51b3)
  MTU 1500 bytes, BW 10000000 Kbit/sec, DLY 10 usec, 
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive not set
  Full-duplex, 10Gb/s, link type is auto, media type is SFP-10GBase-SR
  input flow-control is off, output flow-control is unsupported 
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts (0 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 0 multicast, 0 pause input
     0 input packets with dribble condition detected
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 3 interface resets
     0 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 pause output
     0 output buffer failures, 0 output buffers swapped out

NYC-SW-26-01#sh log | inc 2/0/1  
Jul 31 19:00:28.175: %LINK-5-CHANGED: Interface TenGigabitEthernet2/0/1, changed state to administratively down
Jul 31 19:02:17.989: %LINK-3-UPDOWN: Interface TenGigabitEthernet2/0/1, changed state to down

NYC-SW-26-01#sh inv
NAME: "1", DESCR: "WS-C2960S-48LPD-L"
PID: WS-C2960S-48LPD-L , VID: V04  , SN: FOC1713ZZZZ

NAME: "2", DESCR: "WS-C2960S-48LPD-L"
PID: WS-C2960S-48LPD-L , VID: V04  , SN: FOC1713ZZZZ

NAME: "TenGigabitEthernet2/0/1", DESCR: "SFP-10GBase-SR"
PID: SFP-10G-SR          , VID: V03  , SN: C1402250130     

NAME: "3", DESCR: "WS-C2960S-48LPD-L"
PID: WS-C2960S-48LPD-L , VID: V04  , SN: FOC1709ZZZZ

nyhq-core01#sh log | inc 3/3
nyhq-core01#
1个回答

正如 MikePennington 和 YLearn 所证实的那样,如果您在 4500 机箱中有双管理卡,则只有四个 SFP+ 插槽中的前两个可以在每个 sup 刀片上工作。其他两个端口在软件中被禁用,目前没有迹象表明最终用户已禁用这些端口。