我可以发出什么命令来查看运行 IOS 3.07.04E 的 Cisco 3650 交换机的当前电源（POE 和系统电源）。
Sh Env Power #向我展示电源，而不是使用情况。
Sh Power Inline #show me the inline power消耗和使用。
谢谢
显示当前功耗 Cisco 3650 IOS 3.07.04E
网络工程
思科
思科-ios
力量
2021-07-04 14:26:04
2个回答
Cisco 新 3650 平台的功耗变化很大。这完全取决于交换机模型上的流量、PoE 和端口利用率。思科制作了一个功耗表，显示了不同场景的不同用法。它可以通过提供的链接获得。图片供日后参考。请记住添加接入点、IP 电话或摄像头的内联电源。
无法通过 IOS 显示实时功耗。
资料来源：查找表 12
我目前找不到任何 3650，但我有一台运行 3.7.3E 的 3850。看起来它会告诉你实际消耗量。
Switch#show power inline police
Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
1 1800.0 215.6 1584.4
Interface Admin Oper Admin Oper Cutoff Oper
State State Police Police Power Power
--------- ------ ---------- ---------- ---------- ------ -----
Gi1/0/1 auto off none n/a n/a n/a
Gi1/0/2 auto off none n/a n/a n/a
Gi1/0/3 auto off none n/a n/a n/a
Gi1/0/4 auto off none n/a n/a n/a
Gi1/0/5 auto off none n/a n/a n/a
Gi1/0/6 auto off none n/a n/a n/a
Gi1/0/7 auto off none n/a n/a n/a
Gi1/0/8 auto off none n/a n/a n/a
Gi1/0/9 auto on none n/a n/a 2.7
Gi1/0/10 auto on none n/a n/a 2.5
Gi1/0/11 auto on none n/a n/a 2.6
Gi1/0/12 auto on none n/a n/a 2.7
Gi1/0/13 auto on none n/a n/a 2.6
Gi1/0/14 auto on none n/a n/a 2.7
Gi1/0/15 auto off none n/a n/a n/a
Gi1/0/16 auto on none n/a n/a 2.7
Gi1/0/17 auto on none n/a n/a 2.7
Gi1/0/18 auto on none n/a n/a 2.7
Gi1/0/19 auto on none n/a n/a 2.6
Gi1/0/20 auto on none n/a n/a 2.7
Gi1/0/21 auto on none n/a n/a 2.7
Gi1/0/22 auto on none n/a n/a 2.6
Gi1/0/23 auto on none n/a n/a 2.7
Gi1/0/24 auto off none n/a n/a n/a
Gi1/0/25 auto off none n/a n/a n/a
Switch#show power inline gigabitEthernet 1/0/20 detail
Interface: Gi1/0/20
Inline Power Mode: auto
Operational status: on
Device Detected: yes
Device Type: Ieee PD
IEEE Class: 3
Discovery mechanism used/configured: Ieee and Cisco
Police: off
Power Allocated
Admin Value: 60.0
Power drawn from the source: 15.4
Power available to the device: 15.4
Actual consumption
Measured at the port: 2.7
Maximum Power drawn by the device since powered on: 3.6
Absent Counter: 0
Over Current Counter: 0
Short Current Counter: 0
Invalid Signature Counter: 0
Power Denied Counter: 0
Power Negotiation Used: None
LLDP Power Negotiation --Sent to PD-- --Rcvd from PD--
Power Type: - -
Power Source: - -
Power Priority: - -
Requested Power(W): - -
Allocated Power(W): - -
Four-Pair PoE Supported: Yes
Spare Pair Power Enabled: No
Four-Pair PD Architecture: N/A
Switch#show ver
Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.07.03.E RELEASE SOFTWARE (fc3)