链路状态经常变化加上 PoE 故障

网络工程 转变 hp-procurve 以太网供电
2022-02-23 23:50:25

日志文件中显示了一个 HP ProCurve 交换机,一个端口经常从离线状态变为在线状态。

I 07/07/17 05:06:04 00076 ports: port 12 is now on-line
I 07/07/17 05:07:22 00077 ports: port 12 is now off-line
I 07/07/17 05:07:25 00435 ports: port 12 is Blocked by STP
I 07/07/17 05:07:27 00076 ports: port 12 is now on-line
I 07/07/17 05:10:49 00077 ports: port 12 is now off-line
I 07/07/17 05:10:51 00435 ports: port 12 is Blocked by STP
I 07/07/17 05:10:53 00077 ports: port 12 is now off-line
I 07/07/17 05:10:55 00435 ports: port 12 is Blocked by STP
I 07/07/17 05:10:57 00076 ports: port 12 is now on-line

首先想到的是连接有问题,但这是否排除了交换机成为故障源?一定要布线吗?或者它可能是另一端的设备。

它还有一个 PoE 故障(第一行中的警告),这种情况大约每月发生一次。这里有同样的问题:我可以将 Switch 排除在源之外吗?在搜索此故障的定义后,它显示“[设备] 可能已断开连接、断电或停止工作。”

这里是来自日志文件的数据:

W 07/08/17 10:47:53 00563 ports: port 1/12 PD MPS Absent indication.
I 07/08/17 10:47:53 00565 ports: port 1/12 PD Removed.
I 07/08/17 10:48:01 00560 ports: port 1/12 PD Detected.
1个回答

对我来说,PoE 的以太网运行时间过长,您会看到 STP 抖动,因为 STP 从默认阻止端口开始,然后在发现端口是边缘端口时将其联机,然后您的设备要么消耗太多电流使电压在其末端下降太多,从而关闭设备以保护其免受掉电情况的影响。这移除了负载,电压再次上升,重新开始循环。也可能是有故障的 PoE 设备。

根据古代HP手册;

Port < port-# > PD MPS Absent indication.
The switch no longer detects a device on < port-# >. The device
may have been disconnected, powered down, or stopped
functioning. 

http://whp-hou9.cold.extweb.hp.com/pub/networking/software/59906044-e1.pdf